|
Here's my Tamiya
F4F-4 Wildcat. It's built OOB with the addition of some CE poseable
seatbelts. Very nice kit that goes together very well with minimal filler.
I used Aeromaster acrylics for the finish with a black enamel wash to
highlight the panel lines. The only drawback is the canopy is too
narrow/thick to pose in the open position. You need to use a replacement
vacuform one from Squadron if you want the canopy slid back.
Click on
images below to see larger images
If you're looking for a
quick build to cure AMS this is one to get.
Jeff
Click on
images below to see larger images
|
